High Performance China Supplier FTTB Agc Control Indoor Optical Receiver
Model No.: OR-H
China Supplier FTTB AGC Control Indoor Optical Receiver
The FTTH Optic Receiver is an Optical Node that receives the Optical Signals and then transfers them to RF signal in the forward Path, The Reverse Path, gathers the RF signals from different user's Modem and feeds the Optical Laser to generate the regular optic signal.
Built-in Microprocessor, and RF Attenuator IC, all parameters will be displayed on LED displayer, Such as input optic power, working voltage, etc, The user can configure Attenuator value and Equalizer value by controlling buttons without additional fixed or adjusted components. It is convenient for installing and maintenance without optic Power Meter. It is different from normal AGC node because it extracts the reference signal from PIN. So when the input Power is -9 to +2 dBm, the output level and CTB and CSO keep constantly.
OR-2HC/F's working range is up to 860/1000MHz, The output part equips 2 way output ports, and each port output level reach up to 106dBuV. Built-in WDM or Filter makes it can work in the Xpon system. And It also equips an interface which connects with Network Management responder.
|Receiving optic power||dBm||-9 to +2|
|Type of input and output interfaces||SC/A PC (Comm), SC/UPC (For GEPON)|
|Passing wavelengths||nm||1310 and 1490|
|CATV Wavelength range||nm||1530 to 1620|
|Flatness in Band||dB||±0.75|
|Return Loss||dB||55 for Optic Link, 16 for RF Link|
|Electrical control equilibrium range||dB||0-15|
|Electrical control Attenuation range||dB||0-15|
|Dimensions||mm||142(L)* 79(W)* 36(H)|
|Control / monitoring||Option|
|Remote interface||RJ45 (SNMP)|
|Working temp||°C||-40 to 60|
|Storage temp||°C||-40 to 80|